Download  Print this page

Specifications; Ec Declaration Of Conformity - Makita 4305 User Manual

Hide thumbs
   

Advertisement

SPECIFICATIONS

Model
Length of stroke .................................................................................. 26 mm
Cutting capacities
Wood ................................................................................................ 135 mm
Mild steel .......................................................................................... 10 mm
Aluminum ......................................................................................... 20 mm
Stroke per minute................................................................................ 500 – 3,000
Overall length ...................................................................................... 249 mm
Net weight ........................................................................................... 2.3 kg
• Due to our continuing programme of research and development, the specifications herein are subject to change with-
out notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 88 dB (A)
sound power level: 99 dB (A)
Uncertainty is 3 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
2
value is 4 m/s
.
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60745, EN55014, EN61000
in accordance with Council Directives, 89/336/EEC and
98/37/EC.
Yasuhiko Kanzaki
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
ENG006-2-V4
CE 2005
Director
ENH101-5
2
4304
4305
26 mm
135 mm
10 mm
20 mm
500 – 3,000
285 mm
2.3 kg

Advertisement

loading

This manual is also suitable for:

4304