Dust Collection; Maintenance; Protecting The Environment - Black & Decker KA450 Manual

ENGLISH
Lock off (Fig. D)
To lock the tool OFF, make sure the paddle (1) is not
u
depressed and push the slider (2) right to the locked posi-
tion. The paddle cannot be depressed while switch is in
locked position.
To unlock the paddle, push the slider left to the unlocked
u
position. The paddle can now be depressed.

Dust Collection

Warning! Collected sanding dust from sanding surface coat-
ings (polyurethane, linseed oil, etc.) can selfignite in sander
dust bag or elsewhere and cause fire. To reduce risk, empty
bag frequently and strictly follow sander manual and coating
manufacturer's instructions.
To attach the canister to the sander, line up the grooves
u
(8) in the canister (6) with the nubs (9) on the dust port (5).
Ensure the longer side (10) of the canister opening is on
the top side of the port.
Slide the canister onto the dust port and turn the canister
u
clockwise to lock it in place as shown in Figure F.
To remove, turn the canister counterclockwise and slide
u
the canister off.
To empty the canister, remove it from the dust port and
u
dump the sanding debris into an appropriate trash recep-
tacle.

Maintenance

Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
6
(Original instructions)
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Input voltage V
ac
Power input
W
-1
Orbits (no load) min
Oscillations (no load)
-1
min
Weight
kg
L (sound pressure) 85 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 96 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
KA450
(Type 1)
230
220
16000
32000
1.22 working unit with dustbag,
no packaging
2 2
) 8.3 m/s , uncertainty (K) 1.5 m/s
h