Peavey SPTM 6X Specification Sheet

S P E C S
P E A V E Y
SP 6X
™

SPECIFICATIONS

Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
70 Hz - 17 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
55 Hz
Power handling:
Full Range:
250 W continuous
500 W program
1000 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
97.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
121.0 dB SPL continuous
127.0 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 12 in woofer, vented
SH12862
High Frequency Section:
1x .875 in. exit/50 mm RX
coil compression driver on CH
with Sound Guard III
™
Box tuning frequency:
Low Frequency Section:
51 Hz
Crossover frequency (internal
passive):
Low Frequency - High Frequency:
2.9 kHz
Impedance (Z):
Full Range:
Nominal:
Minimum:
Input connections:
2x 1/4 inch phone jacks
Enclosure materials and finish:
3/4" novaply covered with a duarable
wear resistant black carpet
Mounting provisions:
This unit is not designed for overhead
suspension.
22 voice
™
3 horn
® Dimensions (H x W x D):
Front:
28.00 in. x 18.94 in. x 18.31 in.
711 mm x 481 mm x 465 mm
Rear:
28.00 in. x 13.00 in. x 18.31 in.
711 mm x 330 mm x 465 mm
Net weight:
67 lbs. (30.5 kg)
Features:
• SH 12862 12" Sheffield
• RX22 compression driver
8.0 Ω
• CH
6.1 Ω
• Sound Guard
protection circuit
• SA-1
E L E C T R O N I C S
woofer
®
3 constant directivity horn
®
III high-frequency
™
stand adaptor
™
Description:
The latest version of the SP 6X has the
new RX 22 high frequency compression
driver incorporated, as well as a very nice
looking cabinet design. The SP 6X is a
two-way speaker system comprised of a
12" Sheffield woofer and an RX 22
®
compression driver loaded onto a CH
constant directivity horn.
The SP 6X has a trapezoidal shaped
™
enclosure, which reduces the build-up of
standing waves inside the enclosure,
which minimizes mid-bass and mid-range
colorations due to the cabinet. It is
constructed of 1/4" high density particle
board and is covered with a durable black
carpet. The enclosure corners are
reinforced with polymer caps, and a black
powder-coated expanded metal grille
covers the lower half of the system to
protect the woofer from external damage.
An SA-1 stand mount adaptor is built-in
for ease of speaker stand use.
3
®