Maytag MDG28PDCWW Installation Instructions Manual page 25

Commercial dryer – gas or electric
Table of Contents

Advertisement

Available languages

Available languages

DISPLAY
After the dryer has been installed and plugged in, the display will
show '0 minutes.'
Once the dryer has been plugged in and the dryer door opened
and closed, the display will show the price. In PR models set for free
cycles, the display will flash 'SELECT CYCLE' and the cycle time.
PD Models
PRICE
PR Models
SET-UP CODES
The set-up code is indicated by the one or two left hand characters.
The set-up code value is indicated by the two or three right hand
characters.
NOTE: The first line of each code indicates the factory default
for PD models. The set-up codes for PR models are the same
except where noted.
CODE
6 0 6
REGULAR CYCLE PRICE
6 0 6
Represents the number of quarters (coin 1) needed to start
the dryer; may adjust from 0-39 (See b.xx set-up for VALUE
OF COIN 1). Advance from 0-39 by pressing WHITES &
COLORS. Factory default of 6 quarters = $1.50.
6 0 0
PR MODELS: Factory default of 6 00, or 0 quarters.
g
Press PERM. PRESS key pad once to advance to next code.
7 0 5
REGULAR DRY TIME
PD MODELS: Represents the number of minutes per quarter (coin 1).
7 0 5
Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the WHITES & COLORS key pad, value adjusts
from 1-99 minutes.
PR MODELS: Represents the cycle length for free cycles.
7 4 5
As example: '7 45' = 45 minutes.
g
Press PERM. PRESS key pad once to advance to next code.
8 0 0
TYPE OF DRYER PRICING
Fixed Cycle with Top Off. For detailed description, see General
8 0 0
User Information.
PR MODELS ONLY: Factory default of FC. Fixed Cycle.
8 f c
For detailed description, see General User Information.
Use DELICATES key pad to make this selection.
g
Press PERM. PRESS key pad once to advance to next code.
CYCLE COUNTER OPTION
9 0 0
This option is either Selected 'ON' or Not Selected 'OFF'.
9 0 0
Not Selected 'OFF'.
Selected 'ON' and not able to be deselected. Press DELICATES
9 0 c
key pad 3 consecutive times to select 'ON'. Once selected 'ON'
it cannot be deselected.
g
Press PERM. PRESS key pad once to advance to next code.
EXPLANATION
CODE
1. 0 0
MONEY COUNTER OPTION
This option is either Selected 'ON' or Not Selected 'OFF'.
1. 0 0
Not Selected 'OFF'.
1. 0 c
Selected 'ON'.
Press DELICATES key pad 3 consecutive times to select
'ON' and 3 consecutive times to remove (Not Selected 'OFF'.)
Counter resets by going from 'OFF' to 'ON'.
Selected 'ON' and not able to be deselected.
1. c0
To select 'ON' and not able to be deselected, first select 'ON',
then within two seconds press DELICATES twice, WHITES &
COLORS once, and exit the set-up mode.
g
Press PERM. PRESS key pad once to advance to next code.
2. 0 0
SPECIAL PRICING OPTIONS
This option is either Selected 'ON' or Not Selected 'OFF'.
2. 0 0
Not Selected 'OFF'.
Selected 'ON'. Press DELICATES key pad once for this
2.sp
selection.
If SPECIAL PRICING OPTION is selected, there is access to codes
'3.' through '9.'
g
Press PERM. PRESS key pad once to advance to next code.
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
3. 0 6
SPECIAL CYCLE PRICE
3. 0 6
Represents the number of quarters (coin 1) needed to start
the dryer; may adjust from 0-39. (See b.xx set-up for VALUE
OF COIN 1). Advance from 0-39 by pressing WHITES &
COLORS. Factory default of 6 quarters = $1.50.
3. 0 0
PR MODELS: Factory default of 0 quarters.
g
Press PERM. PRESS key pad once to advance to next code.
4. 0 5
SPECIAL DRY TIME
4. 0 5
PD MODELS: Represents the number of minutes per quarter (coin 1).
Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the WHITES & COLORS key pad, the value
can be adjusted from 1-99 minutes.
4. 4 5
PR MODELS: Represents the fixed cycle time in minutes.
As example: '4 45' = 45 minutes.
g
Press PERM. PRESS key pad once to advance to next code.
5. 0 0
TIME-OF-DAY CLOCK, MINUTES
5. 0 0
This is the TIME-OF-DAY CLOCK, minute setting; select
0-59 minutes by pressing WHITES & COLORS key pad.
g
Press PERM. PRESS key pad once to advance to next code.
6. 0 0
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time – 24 hr. clock.
6. 0 0
This is the TIME-OF-DAY CLOCK, hour setting; select
0-23 hours by pressing WHITES & COLORS key pad.
g
Press PERM. PRESS key pad once to advance to next code.
EXPLANATION
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents