Maintenance And Daily Cleaning - Siemens TE503 Instruction Manual

en
3� Turn the rotary selector (6d) to "Warm
i
milk" or "Milk froth"
h
4� Press the button (11)�
h
The button (11) flashes and the
appliance now heats up for approx�
20 seconds� The display then shows
Pull milk frother
5� Pull the milk frother (6) to open it�
A
Risk of burns!
Milk froth or warm milk comes out of the
milk frother (6) at high pressure� Splashes
of milk can scald� Do not touch the outlet
(6a) or aim it at anyone�
6� Close milk frother (6) by pushing it in�
Tip: For optimal milk froth quality, use cold
milk with a fat content of at least 1�5 % if
possible�
Important: Dried milk residue is difficult
to remove, so the milk frother (6) must be
cleaned with lukewarm water immediately
after use and rinse using the
programme�
system
12
j
�
�
Rinse milk
Maintenance and
daily cleaning
A
Risk of electric shock!
Unplug the appliance before cleaning it�
Never immerse the appliance in water�
Do not use a steam cleaner�
● Wipe the outside of the appliance with a
soft, damp cloth�
● Do not use abrasive cloths or cleaning
agents�
● Always remove any limescale, coffee,
milk or descaling fluid residue immedi-
ately� Such residue can cause corrosion�
● New sponge cloths may contain salts�
Salts can cause rust film on stainless
steel and must therefore be washed out
thoroughly before use�
● Pull the drip tray (8c) with the coffee
grounds container (8b) forward and out�
Remove the panel (8a) and the grate
(8d)� Empty and clean the drip tray and
coffee grounds container�
● Remove drawer (4) and clean�