Download  Print this page

Peavey Classic 112E Specifications

Enclosure.
Hide thumbs
   

Advertisement

Classic@
Enclosure

SPECIFICATIONS

Power Handling:
75 W RMS
Transducer:
One 12" Sheffield@ 1230
Impedance, Z:
16 ohms
Input Connections:
One l/4" phone jack
DESCRIPTION
Offered as a companion enclosure
for the Classic 30, the Classic 112E is a
closed-back cabinet with a
Sheffield 1230 speaker. The 112E's
with any of the Classic 5Os, Classic
Each enclosure has a detachable
back section, the removal of which
obtain maximum low-end response and
cabinet-induced tone coloration, the
back should remain intact.
One particularly good application for
this enclosure is in a situation where the
room is too small to accommodate two
(or four) twelve-inch speakers. In such
an environment, the Classic 112E
produces a high-volume tone at lower
volumes (with cone distortion), because
twice as much power is delivered to one
twelve-inch speaker, as opposed to
dividing the signal between two twelves.

Advertisement

Table of Contents

   Related Manuals for Peavey Classic 112E

Comments to this Manuals

Symbols: 0
Latest comments: