Configuring Wireless Network; Example Of Wireless Settings - D-Link DIR-620 Quick Installation Manual

Multifunction wireless router supporting wimax, 3g gsm/cdma with built-in switch
Hide thumbs Also See for DIR-620:
Table of Contents

Advertisement

DIR-620

Configuring Wireless Network

By default, the wireless network of the router is open (it requires no password
to access it). To avoid unauthorized access to your wireless local area network,
change the default settings of the router.

Example of Wireless Settings

1. Go to the Net / Wi-Fi page.
2. Go to the Security settings tab.
3. Select the WPA-PSK value from the Network Authentication drop-
down list.
4. Enter a key (a password that will be used to access your wireless
network) in the Encryption Key PSK field. Use digits and Latin
characters.
5. Select the AES value from the WPA Encryption drop-down list.
6. Click the Change button.
If you perform initial configuration of the router via Wi-Fi connection,
!
note that immediately after changing the wireless default settings you
will need to reconfigure the wireless connection using the newly
specified settings.
Quick Installation Guide
16

Advertisement

Table of Contents
loading

Table of Contents