Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for StarLeaf GT Mini
Summary of Contents for StarLeaf GT Mini
-
Page 1: Installation Guide
GT Mini Installation Guide 30 March 2015... -
Page 2: Table Of Contents
Connecting to the cloud Provisioning the Group Telepresence through the portal Quick connect Using the line-in connector Allowing users to connect a laptop to Group Telepresence Near-end camera control for GT Mini with PTZ camera Device settings XLR settings Line in Line out... - Page 3 About StarLeaf touchscreen controllers Touchscreen controller features Appendix: LED behavior Network port LED behavior StarLeaf Phone Port LED behavior Appendix: GT Mini dimensions and mounting Legal information Third party software acknowledgements Disclaimers and notices StarLeaf Group Telepresence Installation Guide Page 3 of 27...
-
Page 4: About The Codec
StarLeaf portal (refer to Device settings (p13)) 4P4C connector providing an RS-232 interface. There is a serial API option for the GT Mini and a StarLeaf Room Systems API guide is available Camera control Mini-DIN-8 connector for controlling zoom, pan, and tilt using VISCA™... -
Page 5: Using The Correct Hdmi And Dvi Cables
Appendix: LED behavior (p25). Note: Older models of GT Mini have HDMI ports labeled 1 and 2. In this case plug screen 1 into port 2. Using the correct HDMI and DVI cables When connecting HDMI or DVI cables to the camera inputs, the PC input, and the telepresence screen display outputs, ensure you use the correct gauge of HDMI/DVI cable. -
Page 6: About The Touchscreen Controller
About the touchscreen controller About the touchscreen controller Every Group Telepresence system comes with a touchscreen controller: the StarLeaf Touch 2035. You will use the touchscreen controller as the means for making, and controlling video calls with Group Telepresence. Through the touchscreen controller, you will access the directory and contacts. -
Page 7: About The Camera
Before you install the camera, read the safety information in the documentation that accompanies the camera. The GT Mini can be used with either a PTZ (Pan, Tilt, Zoom) video conferencing camera or with a supported USB webcam. The StarLeaf Knowledge Base at http://support.starleaf.com/knowledge-base... -
Page 8: Installing Gt Mini
Installing GT Mini Installing GT Mini Before installing a StarLeaf product, read the safety information at www.starleaf.com/safety. Pre-requisites Before installing the Group Telepresence system, ensure you have the following: A StarLeaf Cloud account One or two telepresence screens that support a 1080p60 input format (use televisions... -
Page 9: Connecting Cables To The Codec
Installing GT Mini Connecting cables to the codec 1. Using an Ethernet cable, connect the StarLeaf Phone port on the codec to the network port (PoE) on the rear of the touchscreen controller. The network port on the touchscreen controller is marked with this symbol:... -
Page 10: Quick Connect
The picture below shows the device settings for the Group Telepresence system. Quick connect The touchscreen controller receives power from the Group Telepresence System. The first time it starts up it will display the screen shown below. Enter your StarLeaf quick connect code. StarLeaf Group Telepresence Installation Guide... -
Page 11: Using The Line-In Connector
The touchscreen controller will display the meeting room name and extension number as per your StarLeaf Cloud account. This is the home screen of the touchscreen controller. The Group Telepresence System is ready to make and receive calls. An example home screen is shown below. -
Page 12: Allowing Users To Connect A Laptop To Group Telepresence
The Camera Control tab on the home screen provides you with controls for the Group Telepresence camera if you are using a PTZ camera with the Gt Mini. If you are using a GT Mini, the camera selector will be set to camera 1 and you cannot change it. -
Page 13: Device Settings
For each XLR connector, you can alter the power and volume. Phantom power is a way of providing power to a microphone. The StarLeaf GT Mini and Group Telepresence 3351 both offer phantom power through each of its XLR connectors for use by active microphones, such as the StarLeaf Microphone. -
Page 14: Line In
3rd-party microphones. If you need to alter the input sensitivity of the XLR connectors, contact StarLeaf technical support. If you need to alter the gain of the XLR connectors, contact StarLeaf Technical Support. Line in Use this setting to adjust the audio gain on the line in connector on the rear of the Group Telepresence system. -
Page 15: Audio Device Selection For Audio-Only Calls
These settings provide options for selecting the audio output in audio-only calls: use StarLeaf Phone or Touch: in an audio-only call on the StarLeaf Phone, the sound will emanate from the handset or headset of the phone unless someone has pressed the speakerphone button on the phone, in which case the sound will emanate from the phone's speaker. -
Page 16: Typical Installation Of Gt Mini
Typical installation of GT Mini This diagram shows a typical installation of a GT Mini. Camera Configuration (either the supplied PTZ or USB camera) To configure audio, display, and other settings, go to https://portal.starleaf.com Power supply USB camera for camera... -
Page 17: Using The Conference Phone 2220
If you are using the Conference Phone 2220, the installation procedure for the Group Telepresence system is slightly different. The diagram below shows how to connect the StarLeaf Touch to the Conference Phone and into the StarLeaf Phone connector on the rear of the Group Telepresence system. - Page 18 StarLeaf Group Telepresence Installation Guide Page 18 of 27...
-
Page 19: Using Group Telepresence
Information about using Group Telepresence is available at support.starleaf.com/documentation If you have any problems with Group Telepresence, for example if there are audio or video issues, contact StarLeaf Technical Support for guidance. To do so, go to support.starleaf.com StarLeaf Group Telepresence Installation Guide... -
Page 20: About Starleaf Touchscreen Controllers
About StarLeaf touchscreen controllers About StarLeaf touchscreen controllers Every StarLeaf hardware endpoint is provided with a touchscreen controller. You will use the touchscreen controller as the means for making, and controlling video calls. Through the touchscreen controller, you will access the directory and contacts. You will use the touchscreen controller to create ad hoc conferences and to add and remove participants. - Page 21 The StarLeaf Touch 2035 The figure below shows the features on the StarLeaf Touch 2035. The StarLeaf Phone 2120 The figure below shows the features on the front of the StarLeaf Phone 2120. Message waiting indicator Audio volume down Audio volume up...
- Page 22 About StarLeaf touchscreen controllers Message waiting indicator Audio volume down Audio volume up Headset Speaker Keypad Audio mute Home button Video mute Microphone location StarLeaf Group Telepresence Installation Guide Page 22 of 27...
-
Page 23: Touchscreen Controller Features
Phone 2120 only. Optionally, press to use a headset that you have connected to the headset connector on the rear of the phone. The button lights when the headset is in use. For the StarLeaf Touch 2020, the Headset indicator is reserved for future use... - Page 24 Video call using StarLeaf Personal Telepresence 3050: If you have a StarLeaf Personal Telepresence 3050 system, press to listen through the loudspeakers of the monitor and also to use the microphone inside the StarLeaf Monitor.
-
Page 25: Appendix: Led Behavior
On for 1000 Mbit/s link, off for 10/100 Mbit/s link or (On the right when looking at the no link port) StarLeaf Phone Port LED behavior State Link/Activity LED (Yellow) (On the Solid yellow indicates there is a link, flashing when... -
Page 26: Appendix: Gt Mini Dimensions And Mounting
Appendix: GT Mini dimensions and mounting Appendix: GT Mini dimensions and mounting StarLeaf Group Telepresence Installation Guide Page 26 of 27... -
Page 27: Legal Information
StarLeaf Limited. StarLeaf Limited reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of StarLeaf Limited to provide notification of such revision or change. StarLeaf Limited provides this documentation without warranty, term, or condition of any...
Need help?
Do you have a question about the GT Mini and is the answer not in the manual?
Questions and answers