Table of Contents
Related Manuals for Vimar 02032
Summary of Contents for Vimar 02032
- Page 1 Instructions manual 02032 Due Fili power supply unit for LEDs and CCTV type cameras with 10.5 V d.c., 13.5 V d.c., 18 V d.c. 35 VA output, power supply 230 V~ 50 Hz, installation on DIN rail (60715 TH35), occupies 4 modules of 17.5 mm.
- Page 2 1. DESCRIPTION Art. 02032 is a programmable power supply unit for surface or panel mounting with omega DIN bar size 4 modules. It is equipped with an input (+I), an output (+U) and terminals (A,B,C,D) that, appropriately connected together, determine different voltages at the output.
- Page 3 The power supply unit must be inserted in the video door entry system to switch on two or more video door entry units simultaneously: the first monitor must be connected directly to the system’s power supply unit, all the subsequent ones must each be powered by a power unit Art. 02032.
- Page 4 N.B. Make a bridge between the terminals A, B and D. 1st 2nd 3rd 4th pillar MONITOR TERMINAL BLOCKS TO THE VIDEO CAMERA POWER SUPPLY ART. 02032 DISTRIBUTOR ART. 5556/004 NETWORK TO THE POWER SUPPLY ART. 6580 - 6581 - 6680...
- Page 5 4.3 POWER SUPPLY OF VIDEO CAMERAS ASSIGNED TO CCTV The power supply unit is used in CCTV systems to power video cameras operating at 12Vd.c. The power unit always delivers 0.25A. POWER SUPPLY ART. 02032 VIDEO CAMERA ART. 5000 ART. 5020-5A20-5B20 ART.
- Page 6 Input voltage: +I - , 0 V Output voltage: +U - , + 13.5Vd.c. 0.25A stabilized and protected against shorting. N.B. Make a bridge between the terminals B and C POWER SUPPLY ART. 02032 VIDEO CAMERA ART. 5000 ART. 5020-5A20-5B20 NETWORK ART.
- Page 7 Installation Rules - Standard Compliance 5. INSTALLATION RULES Installation should be carried out in compliance with the current regulations regarding the installation of electrical systems in the country where the products are installed. - Carefully read the instructions given in this document as they provide important information on safety for installation, use and maintenance. - After removing the packing, check the integrity of the appliance.
- Page 8 Viale Vicenza, 14 I 36063 Marostica VI Tel. +39 0424 488 600 Fax +39 0424 488 188 49400241A0 EN 02 1204 http://www.vimar.eu VIMAR - Marostica - Italy...
Need help?
Do you have a question about the 02032 and is the answer not in the manual?
Questions and answers