Troubleshooting - Black & Decker BDCSMCA Instruction Manual

Cutter attachment for drills
Hide thumbs


Black & Decker (U.S.) Inc. warrants this
product for two years against any defects
in material or workmanship. The defective
product will be replaced or repaired at no
charge in either of two ways.
The first, which will result in exchanges only, is
to return the product to the retailer from whom
it was purchased (provided that the store is a
participating retailer). Returns should be made
within the time period of the retailer's policy
for exchanges (usually 30 to 90 days after
the sale). Proof of purchase may be required.
Please check with the retailer for their specific
return policy regarding returns that are beyond
the time set for exchanges.
The second option is to take or send the
product (prepaid) to a BLACK+DECKER
owned or authorized Service Center for
repair or replacement at our option. Proof of
purchase may be required.
• Unit will not start.
For assistance with your product, visit our website for the location of
the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986.
NOTE: Refer to your screwdriver instruction manual for troubleshooting solutions regarding
operation of the screwdriver.


possible Cause
• Attachment is not secured.
Imported by:
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
This warranty does not apply to accessories.
This warranty gives you specific legal rights
and you may have other rights which vary
from state to state or province to province.
Should you have any questions, contact the
manager of your nearest BLACK+DECKER
Service Center. This product is not intended
for commercial use.
If your warning labels become illegible or
are missing, call 1-800-544-6986 for a free
LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in
the packaging, call the local company or
see the website for warranty information.the
packaging, call the local company or see the
website for warranty information.
possible Solution
• Make certain the attachment is fully
attached to the screwdriver.

Hide quick links:



  Related Manuals for Black & Decker BDCSMCA

Table of Contents