Table of Contents
Advertisement
User Controls
20
English
Remote Control
Using the Remote Control
Infrared transmitter Sends signals to the projector.
LED
Power
Exit
Zoom in
Reset
Zoom out
Enter
Input
Auto
Four Directional
Select Keys
Keystone +/-
Volume +/-
Aspect ratio
Menu
LED Indicator.
Refer to the "Power On/Off the
Projector" section on pages 13-14.
Press "Exit" to close the OSD menu.
Zoom in the projector display.
Return the adjustments and settings to
the factory default values. (except for
lamp counter)
Zoom out the projector display.
Confirm your item selection.
Press "Input" to select an input signal.
Automatically synchronizes the
projector to the input source.
Use
to select items or make
adjustments to your selection.
Adjust image distortion caused by tilting
the projector.
Adjust to increase / decrease the
volume.
Use this function to choose your de-
sired aspect ratio.
Press "Menu" to launch the on-screen
display (OSD) menu. To exit OSD,
press "Menu" again.
Advertisement
Table of Contents
