Run a stereo pair of RCA from the pre-out (14) to the subwoofer line-in. If your subwoofer has only one line-in, you can use a Y Adapter at the Nova (Dual Male to Single Female) which will give you a summed single output. This single line RCA type plug will then be connected to the single input on your subwoofer.
Page 4
Give the Nova adequate ventilation as it will get fairly warm. The blue lighted ring around the digital inputs of the Nova have a diagnostic built in. If the digital signal is not locked on the DAC it will continue to blink. Check your connections and be sure your source is turned on and playing.
USB drivers or software programs in order to listen to your music from your computer. The Nova’s USB audio input is used to take music files from your computer’s hard drive and play them back with superb fidelity.
Page 6
**warning ** Improper voltage setting may cause damage to the Nova. AC power cord attachment & Fuse: The three prong power cord is included in the Nova box. Fuse is user replaceable after turning the Nova off. You may call your dealer or Signal Path’s service department with any questions regarding fuse re- placement.
Page 7
USB device. You should not have this problem often. We designed the Nova to remain locked on the USB signal at all times, but sometimes you can still get a signal dropout. This can require some trial and error diagnostics.
Page 8
We suggest that after you manually turn the Nova R e m o t e “on”, that standby be your default position when the Nova is not in C o n t r o l use. It will not damage the unit or wear the parts out more quickly than being completely “off”.
Need help?
Do you have a question about the Nova and is the answer not in the manual?
Questions and answers