Avery Dennison Wireless Ethernet Print Server Monarch 7411 Setup Manual
Avery Dennison Wireless Ethernet Print Server Monarch 7411 Setup Manual

Avery Dennison Wireless Ethernet Print Server Monarch 7411 Setup Manual

Wireless ethernet print server
Hide thumbs Also See for Wireless Ethernet Print Server Monarch 7411:

Advertisement

E T H E R N E T S E T U P G U I D E
The Monarch® 7411™ wireless Ethernet Print Server lets you communicate
with a Monarch® 9855® or 9860™ printer on a 10baseT or 100baseTX wired
Ethernet network or on an 802.11b or 802.11g wireless network. The print
server operates in Ad-Hoc (peer-to-peer) mode or infrastructure (access
point) wireless mode. You can also remotely manage and download print
batches, formats, printer configurations, and fonts. MonarchNet2™ software
is available on your printer for a licensing fee. Contact your sales
representative for more information about MonarchNet2, or visit our Web
site (www.paxar.com).
The print server supports multiple network protocols for users with
Telnet/FTP, Microsoft® Windows® 98, 2000, NT®, XP, and Vista™, TCP/IP
(including LPR/LPD, Bootp, DHCP, and HP JetDirect™), Novell® NetWare®
and SNMP. All protocols are simultaneously active.
Note:
When turning on the printer or after sending a ^PR (printer reset)
immediate command, wait at least 30 seconds before sending data
to the print server. Any data sent to the print server before the
30-second interval may be lost.
S e t t i n g U p t h e P r i n t S e r v e r
From the Main menu, select Setup, Port Settings, then Parallel Comm.
Then, follow these steps:
Press
or
1.
PARALLEL COMM
Port
2.
Press Enter/Pause. Press
PORT
Internal
Paxar® is a trademark of Paxar Corporation.
Monarch®, MonarchNet2, 7411, and 9855® and 9860 are trademarks of Paxar Americas, Inc. a subsidiary
of Avery Dennison Corp. Avery Dennison® is a trademark of Avery Dennison Corp.
Microsoft, Windows, and NT are trademarks of Microsoft Corporation.
Novell and NetWare are trademarks of Novell, Inc.
HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc.
Other products are trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
TC7411MN2SG Rev. AC 12/07
until you see
©2006 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.
or
until you see
All rights reserved. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wireless Ethernet Print Server Monarch 7411 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Avery Dennison Wireless Ethernet Print Server Monarch 7411

  • Page 1 Internal Paxar® is a trademark of Paxar Corporation. Monarch®, MonarchNet2, 7411, and 9855® and 9860 are trademarks of Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. Avery Dennison® is a trademark of Avery Dennison Corp. Microsoft, Windows, and NT are trademarks of Microsoft Corporation.
  • Page 2 (Compatible mode is used with a computer connection and a parallel cable.) Set the Port to “External” if you want to use the parallel port. Note: Turn the printer off and back on after changing the parallel port communications mode so the printer can initialize with the new port setting.
  • Page 3 When the printer is turned on, the print server runs through a set of power-up diagnostics for a few seconds. All three LEDs blink momentarily, then indicate the following activity: LED Indicators solid Orange blinking solid Yellow blinking solid Green...
  • Page 4 Start your Web browser. Type in your printer’s IP address (for example, 192.0.0.192) on your computer and press Enter/Pause on the printer. If you are not sure of your printer’s IP address, print a configuration label. The printer’s display shows the “N” network symbol or the antenna symbol when the printer is connected and ready to receive data.

This manual is also suitable for:

Monarch 7411

Table of Contents