Stable Running - Sanyo MIR-162 Service Manual

STABLE RUNNING

Table 1 shows the basic procedure for setting the chamber temperature. Perform key operations in the
sequence indicated in the table. The example in the table is based on the assumption that the desired
o
temperature is 37 C and continuous running.
Note: The unit is set at the factory that the delay
timer is OFF, the chamber temperature is 0
running time is ever on, and the timer mode is normal
mode.
Table 1: Basic operation sequence (Example: Chamber temperature; 37
Description of operation
1 Press the power key.
2 Press the delay timer key.
Press the delay timer key to reset
3
the delay time.
4 Press the delay timer key
5 Press the call key.
Set the temp. to 37.0 with the digit
6 shift key and the numeric value
shift key.
9 Press the run/stop key.
o
C , the
Key operated
The current chamber temperature is displayed.
POWER
The current delay time is displayed.
DELAY
Reset the delay time.
DELAY
The current chamber temperature is displayed.
DELAY
The third digit of the temperature indicator flashes.
CALL
RUN
The setting mode is finished and the unit runs.
STOP
- 37 -
o
37 C
Time
o
C, Continuous running)
Indication after operation
14