Table of Contents
Advertisement
Important service information
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard
disk drive.
Attention:
you are servicing may have been changed. Be extremely
careful during write operations such as copying, saving, or
formatting. If you select an incorrect drive, data or
programs can be overwritten.
How to use error messages
Use the error codes displayed on the screen to diagnose
failures. If more than one error code is displayed, begin the
diagnosis with the first error code. Whatever causes the
first error code may also cause false error codes. If no
error code is displayed, see whether the error symptom is
listed in the Symptom-to-FRU Index for the computer you
are servicing.
Diskette compatibility matrix
The compatibility of each of the drives with the diskettes
for it is as follows:
Diskette
drive
3.5-inch
Safety notices: multilingual translations
In this manual, safety notices appear in English with a
page number reference to the appropriate multilingual,
translated safety notice found in this section.
The following safety notices are provided in English,
French, German, Hebrew, Italian, and Spanish.
4
MT 2373/2374/2375/2376/2378/2379
The drive startup sequence in the computer
Diskette
capacity
1.0 MB
2.0 MB
4.0 MB
Compatibility
Read and write
Read and write
Not compatible
Hide quick links:
Advertisement
Table of Contents
