Download Print this page

Patton electronics 6511 Specifications

Matrix switch with stm-1/oc-3 and gigabit ethernet

Advertisement

Quick Links

Move data rapidly with the Patton 6511 Matrix Switch and get non-blocking any-to-any TDM access,
Packet Switched Ethernet, and high-speed trunking...all in a single card
Non-Blocking I/O Fabric
Get dedicated connectivity to every input and
every output port while grooming TDM or
switching packet data
Integrated STM-1/OC-3 DACS
Resolve traffic down to 64 kbps timeslots,
switch any timeslot to any port or loop it back
Optical or Electrical Egress
Choose between short-haul electrical BNC or
intermediate-range optical SC connectors
Hot Swappable and Redundant
For critical applications use dual 6511s and get
1+1 redundancy. Hot-swap cards for fast main-
Redundant Packet Switching
Reliable packet switching architecture ensures
redundant paths for deploying mission-critical
WEB/SNMP Manageable
Get fault detection and resolution standard.
Use the embedded HTTP/SNMP agent to man-
ForeFront
Matrix Switch with STM-1/OC-3
and Gigabit Ethernet
Model 6511
T
he Patton Model 6511 Matrix Switch is
an integrated multimedia switching
engine complete with a digital access
cross-connect, high-speed STM-1/OC-3 trunk
interface, wire-speed Ethernet packet switch,
and GUI management system.
The Model 6511's flexible channel switching
fabric allows non-blocking switching from
any input to any output. The Channelized
STM-1/OC-3 interface integrates into a
SDH/SONET network, enabling users to
channelize an STM-1/OC-3 down to 64 kbps
timeslots. With full grooming capability the
Model 6511 DACS allows any-to-any TDM
mapping and can place any channel from any
card onto any port.
Combined with the ForeFront AIS Packet-
Switched Backplane, the Model
6511 redundantly interconnects
every slot, at wire-speed, and
aggregates traffic from each sys-
tem card onto dual-switched uplink
Ethernet ports. With increased per-
formance and throughput, the
6511RCT STM-1
Trunk Module
Choose intermediate
optical or short-haul
electrical channelized
STM-1/OC-3 interfaces.
Dual 10/100/1000 Mbps
switched Ethernet ports for
system packet aggregation.
AIS
packet backplane allows non-blocking access
to the Model 6511, other system cards, and
the uplink ports.
With the Forefront architecture, TDM and pack-
et can be used simultaneously and to full
capacity. In a system loaded with dual 6511's,
the high speed channel switching and packet
backplane on the Model 6511 offers 1+1 redun-
dancy.
Management is a snap with VT-100, TELNET,
SNMP and WEB options. Manage traffic out-
of-band via dual 10/100/1000 Ethernet ports
or terminate PPP/FR via timeslots in-band.
With the integrated L2/L3 switch the Model
6511 provides managment access to all
cards within the chassis
Master time and space with the Model 6511
Matrix Switch and realize an unequaled level
of density and control over the new conver-
gent network.
Visit
www.patton.com
tion.
for more informa-
6511RC Matrix
Get high speed channel-
ized DACS, timeslot
mapper, and layer 2
packet aggregation.
Use with 6511RCT and
get high speed network
access from DS-3 and
STM-1/OC-3.

Advertisement

loading

Summary of Contents for Patton electronics 6511

  • Page 1 Move data rapidly with the Patton 6511 Matrix Switch and get non-blocking any-to-any TDM access, Packet Switched Ethernet, and high-speed trunking...all in a single card Non-Blocking I/O Fabric Get dedicated connectivity to every input and every output port while grooming TDM or...
  • Page 2: Specifications

    Connections Patton’s ForeFront Access Solutions for DSL address the new point- of-presence requirements demanded by today’s providers operating 6511 Matrix Switch IP and TDM networks. Using a modular approach, the ForeFront AIS Timeslot Mapper includes all system components to provide DSL access. Fully redun- dant power and integrated cooling enable the lightweight chassis to scale for density and services.