Options - Kenmore 59229212 Owner's Manual And Installation Instructions

Delay Start
You can set the washing machine to start your wash
automatically at a later time, by choosing a delay time.
The hour displayed indicates the time at which the wash will be
started.
1. Set your wash cycle.
2. Press the Delay Start button repeatedly until the delay time
is set.
3. Press the Start/Pause button. The "Delay Start" indicator will
be lit, and the clock will begin counting down until it reaches
the set time.
4. To cancel a Delay Start function, press the Power button and
then turn the washing machine on again.
If the Machine experiences a power failure or interruption
If there is a power failure or interruption in the Delay Start
Mode, you will need to press the Power and Spin buttons
simultaneously for 3 seconds, to reset the unit and cancel the
previously selected cycle.
Pre Soak
Use this function when the laundry is heavily soiled or stained.
This function improves the wash performance by adding a Pre
Soak cycle.
- If you select this function, the total cycle time is increased by
15 minutes.
- When the Pre Soak cycle starts, the washing machine repeats
a wash cycle after supplying water and then performs a 5-minute
soak cycle.
- When the Pre Soak cycle is complete, the configured wash
cycle starts without draining water.
Mist Shower
Mist Shower sprays water from a nozzle that is independent of
the main water supply system.
This soaks the laundry with water from the beginning of the
wash cycle and ensures an effective wash even with a small
amount of water.
(The Mist Shower function may not work if there are too many
cloths.)
22
Kenmore OEM washer_592-29212_DC68-03133J-02_EN.indd 22

Options

blue round object located
left to detergent dispenser
2015/12/16 18:41:28