Related Manuals for Patton electronics 1000RP Series
Summary of Contents for Patton electronics 1000RP Series
-
Page 1: Power Supplies
USER MANUAL Model 1000RP Series AC and DC Rack Mount Power Supplies Part# 07M1000RP-B SALES OFFICE Doc# 078011UB (301) 975-1000 Revised 3/19/96 TECHNICAL SUPPORT (301) 975-1007... - Page 2 • DC Models Available with 48V, 24V and 12V DC Power Input 2.2 DESCRIPTION The Patton Model 1000RP Series power supply modules fit in any Patton rack chassis or Cluster Box, and supply up to sixteen Patton rack cards with necessary operating power. Like all Patton rack cards,...
-
Page 3: Installation
3.0 INSTALLATION Patton’s Model 1000RP Series power supply modules are easy to install and require no configuration. This section describes the functions of the Model 1000R16P rack chassis, tells how to install front and rear power supply cards into the chassis and how to make the power interface connections. -
Page 4: Operation
4.2 LED STATUS MONITOR(S) The AC modules in the Model 1000RP Series incorporate a single “Power” LED, which lights when the power switch is turned on and the unit is connected to an AC power source. -
Page 5: Service Procedures
Switch the unit ON and verify that the front panel “Power” LED is not lit. Switch the unit OFF. Remove the front power supply card and locate the two position switch near the back of the card. Slide the switch to the desired voltage (Note: The actual values on the switch may be "110/220",... -
Page 6: Appendix Aspecifications
Re-install the power cord. 1000RPSM-2 and 1000RPSM-V (AC Front Cards): Power Supply: 120V AC or 220-24V AC, switchable Input Voltage: “120V AC” setting: 100-130V AC; “220V AC” setting: 200-240V AC Maximum Input Current: “120V AC” setting: 400mA; “220V AC”... - Page 7 (APPENDIX A - Continued) 1000RPSM-48A/24A/12A (DC Front Card): Power Supply: 48V DC (-48A version); 24V DC (-24A version); DC (-12A version) Input Voltage: 40-60V DC (-48A version); 18-36V DC (-24A version); 10-20V DC (-12A version) Input Protection: Surge protection via Silicon Avalanche Diode, triggered at 75V DC (-48A version);...