Download Print this page

Advertisement

2
Installation and configuration
What is in the box
Site requirements
Connecting to a network or a computer
Printer memory
ENWW
21

Advertisement

   Also See for HP Color LaserJet 3800

   Related Manuals for HP Color LaserJet 3800

   Summary of Contents for HP Color LaserJet 3800

  • Page 1: 2 Installation And Configuration

    Installation and configuration ● What is in the box ● Site requirements ● Connecting to a network or a computer ● Printer memory ENWW...

  • Page 2: What Is In The Box

    What is in the box The following items come in the box with the printer. Ready Data Stop Menu Attention Figure 2-1 What is in the shipping box Getting started guide Warranty booklet User guide on CD Printer Control-panel overlays (optional) Power cord Chapter 2 Installation and configuration ENWW...

  • Page 3: Site Requirements

    Select a sturdy, well-ventilated, dust-free area that is away from direct sunlight to position the printer. Allow enough space around the printer to open the doors and trays. Physical specifications Table 2-1 Physical dimensions for the HP Color LaserJet 3000/3600/3800/CP3505 Series printers Product Height Depth...

  • Page 4: Connecting To A Network Or A Computer

    Follow the onscreen instructions. When prompted, connect a USB cable between the printer and the computer. NOTE: HP does not recommend using USB hubs. Use a USB cable that is no longer than 2 meters (6.5 feet). Click Finish. If prompted, restart the computer.

  • Page 5

    Connect a USB cable between the printer and the computer. NOTE: HP does not recommend using USB hubs. Use a USB cable that is no longer than 2 meters (6.5 feet). Place the CD in the CD-ROM drive. For OS V9.1 to V9.2.x, go to step 3. For OS X, go to step 7.

  • Page 6: Printer Memory

    This information applies to the HP Color LaserJet 3000, 3800, and CP3505 Series printers only. The HP Color LaserJet 3000, 3800, and CP3505 Series printers have one DIMM slot. ● More printer memory DIMMs are available in 128, 256, and 512 MB increments.

  • Page 7

    On the right side of the printer, gently pull the black tabs together, and then pull the formatter assembly from the printer. Place the formatter board on a clean, flat, grounded surface. To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM slot, lift the DIMM up at an angle, and pull it out.

  • Page 8

    Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the metal contacts are not visible. Push down on the DIMM until both latches engage the DIMM.

  • Page 9: Enabling Memory

    Reconnect the power cable and USB or network cable, and then turn on the printer. After installing a memory DIMM, see Enabling memory on page Enabling memory If you installed a memory DIMM, set the printer driver to recognize the newly added memory. To enable memory for Windows On the Start menu, point to Settings, and click Printers or Printers and Faxes.

  • Page 10

    Chapter 2 Installation and configuration ENWW...

Comments to this Manuals

Symbols: 0
Latest comments: