Table of Contents
Advertisement
Quick Links
This is a Class A device and is intended for use in a
light industrial environment. It is not intended nor
approved for use in an industrial or residential
environment.
Part# 07M6010-UM
Rev. B
Revised 11/10/08
An ISO-9001Certified
Company
USER
MANUAL
Model 6010 Series
POTS/ISDN Splitter Shelf
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
Advertisement
Table of Contents
Summary of Contents for Patton electronics POTS/ISDN Splitter Shelf 6010 Series
- Page 1 This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. Part# 07M6010-UM Rev. B Revised 11/10/08 An ISO-9001Certified Company USER MANUAL Model 6010 Series POTS/ISDN Splitter Shelf...
-
Page 2: Table Of Contents
CONTENTS Warranty Information ... 3 Compliance... 3 EMC Compliance:... 3 Safety Compliance: ... 3 CE Declaration of Conformity ... 3 Service... 4 Safety When Working With Electricity ... 4 General Information... 5 Installing the Shelf... 6 Grounding the Shelf ... 8 Cabling Overview... -
Page 3: Warranty Information
1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 6010 Series and Model 3101SC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. -
Page 4: Service
1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at: •... -
Page 5: General Information
2.0 GENERAL INFORMATION The Model 6010 Series POTS/ISDN Splitter Shelf comes in four different models (Table 1). All models should be installed in a 19 inch or 23 inch rack. Model 6010/1U 6010/3U 6010/4U 6010/9U Table 1: 6010 Series Models Rack Space Requires 1.75 inches (1U) Requires 5.25 inches (3U) -
Page 6: Installing The Shelf
3.0 INSTALLING THE SHELF The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability. CAUTION The Model 6010 shelf is supplied with mounting brackets and hardware to allow installation in a 19 inch or 23 inch rack. - Page 7 Figure 3. 6010/4U Figure 4. 6010/9U...
-
Page 8: Grounding The Shelf
4.0 GROUNDING THE SHELF To comply with the Network Equipment Building Systems (NEBS) requirements, a suitable ground must be provided. The ground lug on the chassis must be used for the ground wire. Figure 5. Grounding the Model 6010... -
Page 9: Cabling Overview
The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability. CAUTION The Model 6010 Splitter Shelf cabling configurations will vary depending on installation locations and the number of lines supported by the DSLAM. -
Page 10: Connector Pinouts Table
6.1 CONNECTOR PINOUTS TABLE Filter ADSL Connector Ring Table 2: Model 6010 Series Connector Pinouts LINE Connector PSTN Connector Ring Ring... - Page 11 NOTES _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________...
- Page 12 NOTES _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ Copyright © 2008 Patton Electronics Company All Rights Reserved...