Press DISP on front panel repeatedly to adjust the
Press and hold DISP to turn off the display, press again
or tap on TFT screen to switch on.
Set rear view camera
If you connected a rear view camera, you can see from the
screen of the car audio system what the camera takes when
the back lamp lights up.
Picture from rear camera is displayed.
The default camera is NTSC system. Go to setting menu
to set PAL system, if your camera is not NTSC system.
Adjust display design
You can change the background screen on the playback mode.
In any mode, tap
The option menu is displayed.
Tap [Display Design] to set the options.
[Wallpaper]: tap to change wallpaper on screen.
[Visualizer]: tap to change visualizer on screen.
[Skin]: tap to change OSD display color.
[Backlight]: tap to change main unit button
Listen to other devices
You can connect an external audio/video device to the car
Connect the car audio to the device with the supplied AV cable.
to display home menu.
Operate the connected the device (see instruction
manual of the device).
If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.
Detach the front panel
You can detach the front panel to deter theft.
Press OPEN to release the panel.
Push the right side of the panel leftward.
Pull the panel towards you to disengage it from the chassis.
Store the panel in the supplied carrying case to protect
it from dirt or damage.
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or similar tool.