Siemens DP/AS-Interface Link 20E Manual page 32

Technical Description, Installation Instructions, Operation
Table 1-4 , continued
Type of DP Master Type of DP Master
Standard complying with
DPV0
Standard complying with
DPV1
GSD file
The GSD file also contains the information about the DP/AS-i Link 20E required by
the configuration tool (for example STEP 7 or COM PROFIBUS).
The GSD file is shipped on diskette along with this manual and can also be
downloaded via a modem from the Interface Center Fürth at the telephone number
+49 911 737972.
The GSD file can also be downloaded from the Internet at
http://www.ad.siemens.de/csinfo/ (under "All Downloads...").
BMP File (bitmap)
To allow graphic representation of the DP/AS-i Link 20E, some configuration tools,
for example STEP 7, use bitmap files. These are also supplied on the
accompanying diskette.
32
DP master configured with...
Tool
Depending on specific For example import
master GSD file in COM
PROFIBUS
Depending on specific For example import
master GSD file in COM
PROFIBUS
Enable DPV1 (see
Section 1.9.2)
Mode/Features Mode/Features
Procedure
DP/AS-Interface Link 20E
C79000-G8976-C138–04
DPV0
DPV1
Release 11/2002