Electrolux T5675 Installation Manual page 24

24
Measure with a pressure measuring instrument (manometer) with an empty drum and with a
program without heat.
By opening and closing the damper (B) the pressure at the heating sensor (NTC sensor) (A)
is either lowered or raised.
The optimum drying performances are achieved when the measured static pressure correspond to
the value listed in the following table.
Model name
T5675
T5675
T5675
T5675
T5675
T5675
Evacuation system
Heating / Frequency
Electric / 50 Hz
Electric / 60 Hz
Gas / 50 Hz
Gas / 60 Hz
Steam / 50 Hz
Steam / 60 Hz
Static pressure Resulting Nominal air flow cold
in NTC sensor empty machine (m
position (Pa)
500 1140
1150 1140
750 1140
1150 1140
900 1380
1100 1380
3 /h)