A. Adjuster Assembly
C. More Than 1 mm (0.04 in.)
Turn the locknut counterclockwise until it contacts
with the adjuster assembly.
With the locknut held immovable using a wrench,
tighten the adjuster assembly to the specified
Adjuster Assembly (to Piston Rod):
28 N·m (2.9 kgf·m, 21 ft·lb)
MAINTENANCE AND ADJUSTMENT
When tightening the locknut, the threads of
the axle holder do not touch the piston rod.
If the piston rod is scratched, it is possible to
the damage in the cylinder unit.
C. Adjuster Assembly
Apply a non-permanent locking agent to the
threads of the adjuster assembly and tighten the
adjuster assembly into the front fork.
Adjuster Assembly (to Axle Holder):
69 N·m (7.0 kgf·m, 51 ft·lb)