Download  Print this page

Advertisement

Install the oil filter cap with the grease applied to
the new O-rings and tighten its bolts to the speci-
fied torque.
A. Oil Filter Element
B. Grommet
C. O-rings
Tightening Torque
Oil Filter Cap Bolts:
9.8 N·m (1.0 kgf·m, 87 in·lb)
After the oil has completely drained out, install the
drain bolts with their new gaskets. Proper torque
for they are shown in the table.
MAINTENANCE AND ADJUSTMENT 43
Tightening Torque
Engine Oil Drain Bolt (M10):
20 N·m (2.0 kgf·m, 15 ft·lb)
Engine Oil Drain Bolt (M6):
7.0 N·m (0.71 kgf·m, 62 in·lb)
NOTE
Replace the gasket and O-rings with new ones.
Fill the engine up to the high level line with good
quality engine oil specified in the table.
Recommended Engine Oil
Castrol "Power1 Racing 4T" 5W-40
Engine Oil Capacity
Capacity:
0.96 L (1.01 US qt) (When filter is not removed)
0.98 L (1.04 US qt) (When filter is removed)
1.20 L (1.27 US qt) (When engine is completely
dry)
NOTE
If unavailable, use equivalent engine oil in accord-
ance with the following table.
Type:
API SG, SH, SJ, SL or SM with JASO MA, MA1
or MA2
Viscosity:
SAE 10W-30, 10W-40, 10W-50

Advertisement

Table of Contents

This manual is also suitable for:

Kx450f 2014Kx450f

Comments to this Manuals

Symbols: 0
Latest comments: