Download  Print this page


A. Air Pump
B. Air Valve (Balance)
Balance Chamber Air Pressure
Air Pressure
900 kPa (9.18 kgf/cm², 131
(Standard Setting)
530 ~ 1 400 kPa (5.40 ~ 14.28
Adjustable Range
kgf/cm², 76.9 ~ 203 psi)
Install the Air valve cap.
Confirm the stroke of the front fork.
Install the front forks to the motorcycle.
Tighten the front fork clamp bolts (lower) to the
specified torque.
Tightening Torque
Front Fork Clamp Bolts (Lower):
20 N·m (2.0 kgf·m, 15 ft·lb)
Tighten the front fork top plug using the top plug
wrench, 50 mm (special tool: 57001-1645) to the
specified torque.
A. Cylinder Unit
B. Outer Tube
C. Top Plug Wrench, 50 mm (Special Tool: 57001-
Tightening Torque
Cylinder Unit:
76 N·m (7.7 kgf·m, 56 ft·lb)
The cylinder unit torque is specified to 76 N·m
(7.7 kgf·m, 56 ft·lb) however, when you use the
top plug wrench, 50 mm (special tool: 57001-
1645), reduce the torque to 90% of the specified
value [67 N·m (6.8 kgf·m, 49 ft·lb)] due to the


Table of Contents

This manual is also suitable for:

Kx450f 2014Kx450f

Comments to this Manuals

Symbols: 0
Latest comments: