A. Cylinder Unit
B. Outer Tube
Temporarily install the cylinder unit to the outer
tube using the top plug wrench, 50 mm (Special
tool: 57001-1645 ).
MAINTENANCE AND ADJUSTMENT 145
A. Top Plug Wrench
B. Cylinder Unit
C. Outer Tube
Hold the axle holder with a vise.
Clamping the axle holder too tight can dam-
age it which will affect riding stability. Do not
clamp the axle holder too tight.
Protect the axle holder with a heavy cloth when
using a vice.
Replace the O-rings on the sealing bolt and piston
rod with new ones and apply teflon grease to the