Download  Print this page

Advertisement

82
HOW TO RIDE THE MOTORCYCLE
Remove the rider's seat (see Seats
section in the GENERAL INFORMA-
TION chapter).
Slide the red cap from the positive
(+) terminal (see Battery section in
the MAINTENANCE AND ADJUST-
MENT chapter).
Connect a jumper cable from the
positive (+) terminal of the booster
battery to the positive (+) terminal of
the motorcycle battery.
NOTICE
Be careful not to contact the
jumper cable slip on the positive
battery terminal to the frame, or
it will cause a short circuit.
A. Motorcycle Battery Positive (+) Terminal
B. From Booster Battery Positive (+) Terminal
C. Swingarm Pivot Shaft Nut
D. From Booster Battery Negative (–)
Terminal
Connect another jumper cable from
the negative (–) terminal of the
booster battery to your motorcy-
cle swingarm pivot shaft nut or other
unpainted metal surface. Do not use
the negative (–) terminal of the bat-
tery.

Advertisement

Table of Contents

This manual is also suitable for:

Z100 abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: