Download  Print this page

Display Setting - Kawasaki Z1000 2014 Owner's Manual

Hide thumbs

Advertisement

When the ignition switch is turned
on, the tachometer (LCD) segment(s)
momentarily go from the minimum to
the 4 000 r/min reading, then go back
the minimum reading.
time, the tachometer (LED) segment(s)
go from the both edges to the other
sides, then go back to the both edge.
If the tachometer does not operate cor-
rectly, have it checked by an authorized
Kawasaki dealer.

Display Setting

Display Brightness Setting
The tachometer (LED) display bright-
ness is auto set by the environment
light. When you feel too bright or too
dark at looking the display, you can
change the tachometer (LED) display
brightness as follows.
At the same
GENERAL INFORMATION
WARNING
For Safety, do not operate the
meter buttons while riding the
motorcycle.
Push the upper and lower but-
tons, and hold them in until the all
tachometer segments go on.
Push the upper button to select the
brightness.
49

Advertisement

Table of Contents

This manual is also suitable for:

Z100 abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: