B. Tachometer (LCD)
C. Tachometer (LED)
D. Red Zone
The speedometer is digital and can
be set for km/h or mph.
The unit setting can be changed ac-
cording to local regulations. Make sure
the unit setting (km/h or mph) is cor-
rectly displayed before riding.
Refer to the Unit Setting in the Dis-
play Setting section.
The LCD display and LED dis-
play have tachometer function.
tachometer shows the engine speed
in revolutions per minute (r/min, rpm).
The tachometer (LCD) shows the value
lower than 4 000 r/min. The tachome-
ter (LED) do also the value higher than
4 000 r/min.
Engine speed should not be al-
lowed to enter the red zone; op-
eration in the red zone will over-
stress the engine and may cause
serious engine damage.