MAINTENANCE AND ADJUSTMENT
Connect the (+) cable to the (+) ter-
minal, and then connect the (–) cable
to the (–) terminal.
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery can seriously damage
the electrical system.
Put a light coat of grease on the ter-
minals to prevent corrosion.
Cover the (+) terminal with the red
Install the removed parts.
Headlight aiming should be done by
an authorized Kawasaki dealer.
The cooling fins at the rear of
headlight become very hot dur-
ing normal operation and can
cause serious burns. To prevent
burns, never touch the cooling
fins at the rear of headlight while
the engine is running or shortly
after it has been stopped.
The headlight beam is adjustable
horizontally. If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
Turn the horizontal adjuster in or out
until the beam points straight ahead.