Download  Print this page

Suspension System; Front Fork - Kawasaki Z1000 2014 Owner's Manual

Hide thumbs

Advertisement

NOTICE
To avoid damaging the electrical
connections inside the switch,
be sure that the switch body
does not turn during adjustment.
Reinstall the right front footpeg
bracket.
Tightening Torque
Front Footpeg Bracket Bolts:
25 N·m (2.5 kgf·m, 18 ft·lb)
NOTE
If a torque wrench is not available,
this item should be serviced by an
authorized Kawasaki dealer.
MAINTENANCE AND ADJUSTMENT

Suspension System

Front Fork

Spring Preload Adjustment
The adjuster is located at the top of
left front fork leg.
Standard
6 1/4 turns in
In from the fully seated position (turned
fully counterclockwise).
Turn the adjuster clockwise to in-
crease spring preload and stiffen the
suspension.
Turn the adjuster counterclockwise
to decrease spring preload and
soften the suspension.
123

Advertisement

Table of Contents

This manual is also suitable for:

Z100 abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: