Download  Print this page

Advertisement

A. Chain Slack
If the drive chain is too tight or too
loose, adjust it so that the chain slack
is within the standard value.
Drive Chain Slack
Standard: 20
30 mm (0.8
Drive Chain Slack Adjustment
Loosen the chain adjuster clamp
bolts on the left and right sides.
Turn the chain adjuster with the Allen
wrench until the drive chain has the
correct amount of slack.
Check
swingarm and the mark on the chain
adjuster are at the same position on
the left and right sides.
1.2 in.)
A. Clamp Bolt
B. Chain Adjuster
C. Allen Wrench
D. Notch
E. Marks
MAINTENANCE AND ADJUSTMENT
that
the
117
notch
on
the

Advertisement

Table of Contents

This manual is also suitable for:

Z100 abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: