Download  Print this page


Loosen the locknuts at the upper
ends of the throttle cables, and
screw both throttle cable adjusters
completely so as to give the throttle
grip plenty of play.
Turn out the decelerator cable ad-
juster until there is no play when the
throttle grip is completely closed.
Tighten the locknut.
A. Boots
B. Decelerator Cable
C. Accelerator Cable
D. Adjusters
E. Locknuts
Turn out the accelerator cable ad-
juster until 2
in.) of throttle grip play is obtained.
Tighten the locknut.
If the throttle cables cannot be ad-
justed with the adjuster at the upper
end of the throttle cable, further ad-
justment of the throttle cables should
3 mm (0.08


Table of Contents

This manual is also suitable for:

Z100 abs 2014

Comments to this Manuals

Symbols: 0
Latest comments: