Additional Safety Instructions - Siemens SINAMICS V90 Operating Instructions Manual

Safety instructions

1.2 Additional safety instructions

3. Hazardous shock voltages caused by, for example,
– Component failure
– Influence during electrostatic charging
– Induction of voltages in moving motors
– Operation and/or environmental conditions outside the specification
– Condensation/conductive contamination
– External influences/damage
4. Electrical, magnetic and electromagnetic fields generated in operation that can pose a
risk to people with a pacemaker, implants or metal replacement joints, etc., if they are too
close
5. Release of noxious substances and emissions in the case of improper operation and/or
improper disposal of components
1.2 Additional safety instructions
Delivery check
Note
Intact deliverables
Deliverables received must be intact. It's not permissible to put a damaged unit into use.
Transport and storage
NOTICE
Property loss
Notify Siemens service personnel immediately of any damage discovered after delivery. If
the equipment is put into storage, keep it in a dry, dust-free, and low-vibration environment.
The storage temperature ranges from -40 °C to +70 °C.
Otherwise you will suffer property loss.
20
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2015, A5E36037884