Connections - Yamaha YAS-203 Owner's Manual

Connections

Connect to a TV (or other peripheral device).
Cautions
• Make sure that the power cables of the sound bar and subwoofer are not connected
to AC wall outlets when you start making connections.
• Do not use excessive force when inserting the cable plug. Doing so may damage the
cable plug or terminal.
1
Connect the TV and sound bar with the optical
cable (supplied).
Remove the cap of the optical cable and check the
direction of the plug.
2
Connect the power cables of the sound bar and
subwoofer to AC wall outlets.
3
Set the TV as follows.
• Set the TV volume to minimum.
• Disable the TV built-in speaker output (if available).
HINT
• If a setting to disable the speaker output is not available on your TV, you may disable it
by connecting headphones to the headphone jack on the TV. For details, refer to the
manuals of the TV.
• The TV and BD/DVD input jacks support the following audio signals.
− PCM (2 channel)
− Dolby Digital (up to 5.1 channel)
− DTS Digital Surround (up to 5.1 channel)
6
Sound bar (rear)
Optical cable
Coaxial digital cable
(commercially available)
OPTICAL OUTPUT
TV
HDMI cable (etc.)
Playback device (such as a BD player)
Set top box
Power cable
To AC wall outlet
Subwoofer (rear)
Power cable
To AC wall outlet
HINT
If your playback device has a coaxial digital
audio output, you can connect it to the BD/
DVD input of the sound bar with a coaxial
digital cable (commercially available).
Coaxial digital
audio output
(orange)