Related Manuals for Patton electronics 1017
Summary of Contents for Patton electronics 1017
- Page 1 Mac Short Range Modem with Transformer Isolation SALES OFFICE Part# 07M1017-A (301) 975-1000 Doc# 082022UA TECHNICAL SUPPORT Revised 3/25/94 (301) 975-1007 http://www.patton.com...
-
Page 2: Radio And Tv Interference
AC/DC over-voltages, making the Model 1017 ideal for connections between two buildings. Measuring only 2.0” x 1.7” x .8”, the Model 1017 is housed in an ABS plastic case. Connection to the Mac serial (phone) port is achieved using an 8-pin mini Din connector at the end of a 1 foot extension cable. - Page 3 Mac and another Mac or another serial device. There are two require- ments for installation: 1. These units work in pairs. You must have one Model 1017 (or a compatible model) at each end of the two twisted pair cable.
-
Page 4: Specifications
TD+ is connected to ground 3.3 OPERATING THE MODEL 1017 Once the Model 1017 is properly installed, it should operate trans- parently—as if it were a standard cable connection. Operating power is derived from the Mac's data and control signals; there is no “ON/OFF”... -
Page 5: Block Diagram
BLOCK DIAGRAM...