Assemble Handle To The Gas Lid; Assemble Handle To Charcoal Lid - Smoke hollow PS9900 Assembly & Operation

Assembly
Step 15: Assemble Handle to the Gas Lid
Step 15
Fig.15
Locate: Gas Lid, (2) Handle Stand-offs, (1)
Long Handle Tube, (4) M6x15 bolts and (1)
Gas Lid Heat Shield
Gas Lid Heat Shield
Procedure: Refer to Fig. 15. Open the Gas
Grill Lid and fit the Heat Shield in place in-
side the lid over the (4) holes for attaching
the Handle. Place (2) M6x15 bolts through
the Heat Shield and then the Lid holes on
one side of the Lid. Fit a Handle Stand-off
over the bolts and attach the Stand-off to the
Lid. Fit the long Handle Tube into both
Stand-offs and then repeat the procedure of
inserting the screws through the Heat
Shield, the Lid and into the other Stand-off.
Tighten all (4) bolts securely.
Step 16
Step 16: Assemble Handle to Charcoal Lid
Fig.16
Locate: Charcoal Lid, (2) Handle Stand-offs,
(1) Long Handle Tube and (4) M6x15 bolts
Procedure: Refer to Fig. 16. Open the Char-
coal Grill Lid. Place (2) M6x15 bolts through
the Lid holes on one side of the Lid. Fit a
Handle Stand-off over the bolts and attach
the Stand-off to the Lid. Fit the long Handle
Tube into both Stand-offs and then repeat the
procedure of inserting the screws through the
Lid and into the other Stand-off. Tighten all
(4) bolts securely.
17