Assembly Instructions - Makita bbx7600 Original Instruction

ASSEMBLY INSTRUCTIONS

ASSEMBLY OF BLOWER PIPES
CAUTION : Before performing any work on the blower, always stop
the engine and pull the spark plug connectors off the
spark plug.
Always wear protective gloves!
CAUTION : Start the blower only after having assembled it
completely.
1. Assemble straight pipe with swivel (3) into flexible pipe (1) and
tighten hose band ø76 (2).
2. Install control handle (4) onto straight pipe with swivel and tighten
the clamp screw (5).
3. Assemble flexible pipe to elbow (6) on blower and tighten hose band
ø100 (7).
4. Assemble straight pipe (8) to straight pipe with swivel, turning
straight pipe clockwise to lock it into place.
5. Make sure all clamps are tight.
(1)
8
(2)
(4)
(5)
(6) (7)
(8)
(3)