Page 2
final selection of the products and systems and assuring that all performance and safety requirements of the application are met.The products are subject to change by Parker Hannifin GmbH at any time without notice. IA EC106 UK.INDD RH 02.06 Power Amplifier f.
Electronic Module for Pressure-/ Flow Valves DSA, DWE, DWU RE*W, TDA*LAF, TEA*LAF Code Quantity IA EC106 UK.INDD RH 02.06 Power Amplifier f. Pressure-/Flow Valves Series EC106 2 channels [VA] 10 ±5% / max. 100mA 2 x 1.3 [°C] 48pole male connector, DIN 41612F Supply connections + valve: AWG15;...
Page 4
Installation Manual EN 50081-2 EN 55011 EN 50082-2 ENV 50140 EN 61000-4-4 Block Diagram (2 Channel Option) IA EC106 UK.INDD RH 02.06 Power Amplifier f. Pressure-/Flow Valves Series EC106 ENV 50204 EN 61000-4-5 EN 61000-4-2 EN 61000-4-6 Parker Hannifin GmbH & Co. KG...
Page 5
Installation Manual Block Diagram (4 Channel Option) IA EC106 UK.INDD RH 02.06 Power Amplifier f. Pressure-/Flow Valves Series EC106 Parker Hannifin GmbH & Co. KG Hydraulic Controls Division...
Page 6
Installation Manual Block Diagram (6 Channel Option) IA EC106 UK.INDD RH 02.06 Power Amplifier f. Pressure-/Flow Valves Series EC106 Parker Hannifin GmbH & Co. KG Hydraulic Controls Division...
Page 7
Turn off the electrical power to the board whenever removing it from the card holder. Black grip strip IA EC106 UK.INDD RH 02.06 Power Amplifier f. Pressure-/Flow Valves Series EC106 b2 Output solenoid 1 b4 Input command 1 / 0...+10V b6 Output solenoid 2 b8 Input command 2 / 0...+10V...
The cable shield has to be connected to ground at both ends (see also chapter “Grounding“). Please be aware of ground loops. IA EC106 UK.INDD RH 02.06 Power Amplifier f. Pressure-/Flow Valves Series EC106 Installation The module has to be mounted within a conductive, shielded enclosure.Usable is i.e.an EMC-approved...
Need help?
Do you have a question about the EC106 Series and is the answer not in the manual?
Questions and answers