Advertisement
Quick Links
Advertisement
Related Manuals for Parasound PAL-265
Summary of Contents for Parasound PAL-265
- Page 1 PAL-265 Precision Architectural Loudspeakers w w w.pa ra sound.com...
- Page 2 PAL-265 Precision Architectural Loudspeakers Owner’s Manual w w w.parasound.com...
- Page 3 Owner’s Manual PA L-265 Precision Architectural Loudspeakers...
- Page 5 Please take a few minutes to read these instructions thoroughly to make the installation easier and insure the best performance of your new PAL-265 Precision Architectural Loudspeakers.
- Page 6 Pre-Drilled Hole for Infrared Receivers The PAL-265 has a 1/2" hole in the bezel to accommodate an infrared receiver such as the Xantech Video Link model 490. The hole can be easily accessed by removing the rubber bushing from the rear of the bezel.
- Page 7 The PAL-265 mid adjustment switch allows you to attenuate the mid response from 0 dB (flat) to -3 dB. If you mounted the PAL-265 near a corner of a wall, you may notice additional boominess of the bass response. You can attenuate the mid-bass response by setting the mid switch to the -3 dB position.
- Page 8 Dome Tweeter IR Receiver Access Hole Kevlar Woofer with Phase Plug Swing arms in retracted position Anti-diffraction Ring Parasound PAL-265 Baffle and Bezel High Tone Adjustment Switches Swing arms in locked and mounted position...
- Page 9 Hole Cut-Out Outer Edge of Frame Optional Accessories Rough-In Kit Parasound Products, Inc. 950 Battery Street, San Francisco, CA 94111 415-397-7100 / FAX 415-397-0144 www.parasound.com Features and specifications subject to change without notice 42 Hz-22 kHz +/- 2 dB 8 Ohms...