Sharp LC-24DHG6131K User Manual page 28

DVD Setup
DVD SETUP
To playback a DVD and access the DVD Setup menu, please ensure that the TV is in the 'DVD' source
mode. To access the DVD source mode, press the 'SOURCE' button on the remote control, then select
'DVD', insert the disc according to the instructions by the DVD slot. To enter the DVD Setup menu, access
the DVD source mode then press the [DVD SETUP] button.
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.
TV Display
- Choose from the following options
4:3 Pan scan PS Traditional picture format, often used on old fi lm
4:3 Letter box LB Traditional picture which has been adapted for widescreen
Wide 16:9 Widescreen picture format
Speaker Setup
- Choose from the following options
LT/RT Converts from multi-channel sound to mono
Stereo Converts from multi-channel sound to stereo
Dual Mono
- Choose from the following options
Stereo Outputs 2 channels of sound both left and right
Mono L Outputs left side sound
Mono R Outputs right side sound
Mix Mono Outputs a single channel of sound but mix between right and left
Dynamic Range
- This is the difference between the quietest and loudest sounds. This setting works only
with DVD discs recorded in Dolby digital.
Full Set this to listen with the range recorded on the disc
3/4 Set this to listen with a range equivalent to a normal television
1/2 Set this to listen with a smaller difference between the maximum and minimum volume
1/4 Set this to listen with a smaller difference between the maximum and minimum volume
Off Set dynamic range to off
TV Type
- Choose from the following options
PAL For discs from UK/Europe, Asia, Australia etc
Multi For both NTSC and PAL
NTSC For discs from North America, Japan etc
Default
- Choose from the following options
Reset Resets all options in the 'DVD setup' menu back to the default settings
Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD
in another country that uses different region discs, please visit www.umc-uk.co.uk. Select 'Product
Support', 'Changing DVD Region'.
buttons.