Liko Likorall 200 Instruction Manual

Liko Likorall 200 Instruction Manual

Overhead lift
Hide thumbs Also See for Likorall 200:

Advertisement

Likorall is a stationary lift unit often called an
"overhead lift". Likorall is mounted in Liko's rail
system, which is adapted to suit the room/rooms
it will be operated in. The rail system can be built
straight, with or without curves, as a traverse system
and also as a room-to-room system. Liko's rail
system is comprised of several hundred different
components, we select the speciic components
needed to customize each system to suit the room
it will be mounted in. The rail system can either be
ixed or freestanding, such as Liko FreeSpan and
Liko FreeStand. The system must be installed by
authorized personnel and in accordance with Liko's
installation instructions.
Likorall is intended for use in lifting and transferring
patients, for example, from bed to a wheelchair, to or
In this document, the person being lifted is referred to as the patient, and the person helping them is referred
to as the caregiver.
is a warning triangle used for situations that demand extra care and attention.
IMPORTANT!
Read the instruction guide for both the patient lift and lifting accessories before use. Lifting and transferring
a person always involves a certain level of risk. It is important to completely understand the contents of the
instruction guides. The equipment should only be used by trained personnel. Please contact Liko in the event of
any uncertainties or questions.
Product Description
from the loor, for visits to the toilet, for gait, standing
and balance training, when weighing the patient and
when lifting the patient with a stretcher.
Likorall 200 is adapted to Liko's Quick-release Hook
System for safe and easy changing of lifting
accessories.
Liko's Room-to-Room system (R2R), enables the patient
to be moved between two rail systems in separate
rooms, without connecting rails and without making
holes over doors.
A large range of accessories are available for Likorall,
including different sling models in a range of types and
sizes.
Likorall 200™
Instruction Guide
7EN120114-01
2009-07-06
Applies to the following models:
Likorall 200 Product No. 3121001
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Likorall 200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Liko Likorall 200

  • Page 1 It is important to completely understand the contents of the instruction guides. The equipment should only be used by trained personnel. Please contact Liko in the event of any uncertainties or questions.
  • Page 2: Table Of Contents

    Likorall 200 has been tested by accredited testing institutes and complies with the requirements for MDD Class I products (MDD 93/42/EEC). Likorall complies with the requirements for IEC 60601-1, IEC 60601-1-2, EN ISO 10535, UL-60601-1 and CAN/ CSA C22.2 No.601.1.
  • Page 3: Technical Data

    6. Charge indicator 7. Lift unit 8. SSP Limit Switch 9. Lift strap 10. Q-link (quick fastener) 11. Quick-release hook 12. Sling bar 13. Safety latches Likorall 200 • 7EN120114-01. w w w . l i k o . c o m...
  • Page 4: Assembly

    Mounting lifting accessories using Quick-release Hook Likorall 200 is equipped with Q-link (Quick-fastener), which is combined with Liko’s Quick-release Hook´s for safe and easy mounting of lifting accessories. Liko’s Quick-release Hooks are protected against unintentional detachment.
  • Page 5: Operation

    Hand control with spring clamp When the lift is not in use, the hand control can be The lifting motion in Likorall 200 is controlled using an attached hand control. Likorall 200 is manoeuvered attached to the lift strap using the spring clamp on the by pressing lightly on the hand control buttons.
  • Page 6 (a short delay may occur when re-starting the lifting motion is normal in these cases). Be aware that the lift strap is kept straight and stretched when it runs in and out of the lift unit. Likorall 200 • 7EN120114-01 w w w . l i k o . c o m...
  • Page 7: Charging The Batteries

    Old batteries are to be left at the nearest recycling station or given to personnel authorized by Liko. Likorall 200 • 7EN120114-01. w w w . l i k o . c o m...
  • Page 8: Transferring From Room To Room

    Transfer is performed in a safe and easy manner, with the aid of separate lift units and a rail system for each room. Liko’s R2R sling bar makes it possible to link together two lift units when moving a patient from room to room.
  • Page 9: Maximum Load

    Liko’s product range contains a wide assortment of sling bars, slings, stretchers, scales and other accessories to solve most lifting needs. Below is an overview of the lifting accessories available for Likorall 200. To select suitable slings and other lifting accessories, please see the “Lifting Accessories” brochure. For additional...
  • Page 10 Liko’s Quick-release Hooks form a system providing safe and easy changing of lifting accessories. Liko’s Quick-release Hooks protect against unintentional detachment. Likorall 200 is used solely with lifting accessories equipped with Quick-release Hooks. Quick-release Hook Universal its Universal SlingBar 350, 450 and 600...
  • Page 11: Simple Troubleshooting

    Liko. 1. Charge the battery (page 7). The lift does not achieve maximum lifting capacity. 2. If the lift still does not function properly, please contact Liko. You hear unusual sounds. Contact Liko. Likorall 200 • 7EN120114-01. w w w . l i k o . c o m...
  • Page 12: Care And Maintenance

    Repairs and maintenance may only be performed by authorized Liko service personnel using original Liko spare parts. Service Agreement Liko offers the opportunity to enter into service contracts for the maintenance and regular inspection of your Liko products. Transport and Storage During transport, or if the lift is not going to be used for a long time, the emergency stop should be engaged.

Table of Contents