Watching Channels From An External Device; Changing Picture And Sound Settings; Sleep Timer; Freeze Mode - Emerson LF501EM5F Owner's Manual

Watching Channels from an External Device

Switching Each Input Mode can easily switch with the Remote Control
between TV (DTV or Analog TV) and External Devices when they are
connected to the Unit.
1
Turn On the Set-top Box or the Connected Device.
The picture from the Set-top Box or the Connected Device might
●
appear Automatically on the TV screen.
If the picture does not appear
① Press SOURCE Repeatedly to select the Set-top Box or the
Connected Device and wait a few seconds between each selection
until the Picture appears.
Pressing H reverses the direction of the Input modes.
●
e.g.)
11.1
Source
TV
DTV / Analog TV
HDMI1
channel
HDMI2
HDMI3
Video
PC
PC
② Use the Remote Control for the Set-top Box or the Connected
Device to select Channels to view.

Changing Picture and Sound Settings

1
Press PIC/SOUND MODE to set your TV to a predefined Picture
and Sound setting.
2
Use H I to select one of the following settings :
Auto
Auto sound
picture
The Customized Settings you defined
Personal
using the Picture and Sound menu
Standard
For normal TV viewing
Enhanced picture contrast, sharpness and
Vivid
sound for viewing in a well-lit room
Brilliant picture settings and clear sound
Sports
for high action
Deep picture and powerful sound settings
Movie
for a cinematic experience
Game
– Optimized for PCs and game consoles
Eco TV settings for low Power
Eco
–
Consumption
Music
– Optimized for Music Playback
Controls Picture Tone and Sets the
News
– Anchor's Voice at a comfortable volume
level
HDMI1
HDMI2
Video
HDMI3
or
Component
Description

Sleep Timer

Sleep Timer can set the Unit to go into Standby mode after an incremental
period of time.
Press SLEEP Repeatedly to change the amount of time
(increases the time by 30 minutes up to 120 minutes).
Press SLEEP Once to call up the display for checking the remaining time.
To cancel Sleep Timer, press SLEEP Repeatedly until Off is displayed.
●

Freeze Mode

Freeze Mode can freeze the image shown on the TV screen
for 5 minutes.
Press FREEZE to freeze the image.
The Sound Output will not be paused.
●
To cancel Freeze Mode, press any keys except B.
●

Switching Audio Mode

Digital TV Operation
1
Press SAP to display the currently selected Language
and the number of available Languages.
2
Press SAP Repeatedly to cycle through the available
Audio Languages.
Note(s)
Available Languages differ depending on the Broadcast.
●
Other is displayed when the Audio Language cannot be acquired or the acquired
●
Languages are other than English, French or Spanish.
Cable / NTSC (Analog) TV Operation
1
Press SAP to display the currently selected Audio mode.
2
While receiving an MTS broadcast, press SAP Repeatedly
to cycle through the available Audio Channels.
e.g.) When All Audio Modes are available
SAP / STEREO
SAP /
Stereo
: Outputs Stereo Audio
SAP
: Outputs a Second Audio Program
Mono
: Outputs Mono Audio
17
Sleep timer 120 min.
Freeze
11.1
English 1/3
11
SAP / STEREO
SAP / STEREO
MONO
Continued on next page.
.
English