Figure 32 I/O Map Data - Black & Decker d984 Installation Manual

Reselect the program and go to configuration screen. Proceed to add the I/O
Mapping information for these two modules to the configuration data you already
established by:
Step
11 Enter the number of I/O modules as the value 2, from the
"Overview" menu.
Step
12 Go to the "IO/Map" menu function and define the presence
of the two modules. Figure 32 is an example of what the
data looks like.
Utility DelDrop HoldTme ASCPort GetDrop
Fl-F2-F3-F4-F5++ -
F7 Lev B-F%OFF--%--
I/D MAR
800 SERIES I/O
Drop
:
1 of1
Rack 1
Drop Hold Up Time
: 3 (xl@Etns)
ASCII Port : 0
Number Inputs
:
16
Number Outputs
:
16
Maduls Reference Nunbers Data Module
Slot
TYPO
Input output
type
Description
101
984
PLC-485E
102
8805 10001 -10016
l&IN BE05
103 BEeI 00001 -00016
l&OUT B804
104 88
105 8.3
106 88
107 BB
108 BB
109
88
110 08
Figure 32 I/O Map Data
Step 13
Return to the main menu and select the Transfer "File to
PLC" menu and at the "Start" prompt, respond with " Y" and
watch the RUN LED go on.
Step
14 You have now repeated the earlier steps (step 10) to
download the configuration but this time the I/O map data is
downloaded with it.
66
System installation
GMa984-EDK