Procedure Rack Mounting Installation; Figure 23 Attaching Rack Mounting Flange To Housing - Black & Decker d984 Installation Manual

Procedure Rack Mounting Installation
Step 1 At Drop 2, using #8-32 mounting hardware shown in
Figure 23, replace the primary housing' s two end plates
with rack mounting flanges.
Step
2
Use l/4-inch bolts (supplied) attach each flange to the
housing' s back panel.
Step
3 When the rack mount flange is installed, ensure that con-
tact with the back plate of the housing makes a good
ground.
LEFT FLANGE
Figure 23 Attaching Rack Mounting Flange to Housing
52
System Installation
GMq984-EDK