Rack Mounting
The H819 Module Housings can be mounted in a 1 C&inch standard (EIA) rack.
Optional hardware can be supplied for installing the " rack adaptor - mounting
flange kit" .
Figure 8 shows dimensions for rack mounting RI/O housing. The following hard-
ware is required for rack mounting each housing:
o (1) 19-inch Standard (EIA) rack
CI (1) pair of rack mounting flanges
o (8) #lo-32,
Pan Head Machine Screws to mount the housing to the NEMA rack
o (8) #I O-32 Flat Lock Nuts if mounting holes in rack' s side rails rails are not
threaded.
o (8) #8-32 Pan Head Machine Screws (supplied) to attach rack mount flanges to
ends of housing
o (8) l/4 bolts (supplied) to attach back of rack mount flanges back of housing
GM-O984-EDK
System Planning
23