Page 2
KEEP ALL FRAME BOLT CONNECTIONS LOOSE UNTIL INSTRUCTED THE ASSEMBLY STEP SEQUENCES TO SECURELY NOTE: ¯ The ParaBody Factor 625 base unit must be assembled a flat, level surface to assure its proper function. ¯ ParaBody strongly recommends that this product...
Page 3
Do not mark this box! Document: 11000199...
Page 4
PARAB6DY INC. FACTOR 625 D-RING RETRO KIT PRODUCT ASSEMBLY INSTRUCTION SHEETS TOOLS REQUIRED FOR ASSEMBLY RATCHET 9/16 INCH SOCKET 7/16 INCH WRENCH ADJUSTABLE WRENCH REVISION: A If you experience any problem with the assembly of this product, please contact yo~ar dealer...
Page 6
607/608 FACTOR 625 D-RING RETRO KIT ASSEMBLY INSTRUCTIONS STEP 1: D-RING’INSTALLATION To assemble the new D-RING to the FACTOR ¯ Remove all the CABLES from the old D-RING. ¯ Loosen, and remove the two (2) 1/4-20 NUTS, and the 1/4 IN. WASHER RING CABLE.
Page 7
607/608 FACTOR 625 D-RING RETRO KIT ASSEMBLY INSTRUCTIONS Replace the remaining CABLES in the following’or~er using the steps outlined in STEP 2: (PLEASE REPLACE ONE CABLE AT A TIME, REPLACING IN A CLOCKWISE DIRECTION AROUND THE D-RING. SEE DRAWING) ¯...