Signal Setting - Siemens WT47W540BY Installation And Operating Instructions Manual
Hide thumbs
Also See for WT47W540BY:
- Installation and operation instruction manual (48 pages) ,
- Installation and operating instructions manual (32 pages)
Table of Contents
Advertisement
Signal setting
en
M
Signal setting
You can change the following settings:
S i g n a l s e t t i n g
The volume of the audible signal at
■
the end of the programme
and/or
The volume of the audible button
■
signals.
Activate or deactivate automatic
■
switch-off.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
Switch the dryer on.
1.
Select the Cottons programme in
2.
position 1.
Press and hold the button for the
3.
dryness level and, at the same time,
turn the programme selector
clockwise to position 2.
Release the button for the dryness
4.
level.
The setting mode is now activated and
the preset volume for the audible signal
at the end of the programme appears
on the display panel.
Changing the volume or automatic
switch-off
Leave the programme selector or turn it
to:
Position 2: Press the button for the
■
"Ready in" time to change the
volume of the audible signal at the
end of the programme
and/or
1 = quiet
2 = medium, 3 = loud,
4 = very loud
Position 3: Press the button for the
■
"Ready in" time to change the
volume of the audible button
signals.
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Position 4: Press the button for the
■
"Ready in" time to activate or
deactivate automatic switch-off of
the dryer. "ON" for activated and
"OFF" for deactivated.
To save energy, your dryer
Note:
will switch itself off after 15 minutes
when the "Automatic switch-off"
function is active.
Exiting setting mode
You can now end the process and
switch off the dryer. The settings have
been saved.
Page 30
Hide quick links:
Advertisement
Table of Contents
