Download Print this page

Yamaha YK250XGC Installation Manual: Yk500xglc(p)

Hide thumbs

Advertisement

1.2.4
Connector for user wiring
(No. 1 to 10 usable. Cable clamp size,
φ13.1 to 15)
If not used, cover the connectors with
the caps supplied with the robot.
User tubing 1 (φ4 black)
If the user tubing is not used,
attach the plug supplied with the robot.
User tubing 2 (φ4 red)
56
852
822
702
674
627
5
296
274
247
φ90
186
146
133
A
67.5
±2
0
82.5
50
5-8

YK500XGLC(P)

User tubing 3 (φ4 blue)
User tubing 4 (φ4 white)
30
10
↓F
250
250
51
57
43
A
Z-axis upper end mechanical stopper position
Z-axis rises by 4mm during return-to-origin.
Z-axis lower end mechanical stopper position
70
20
Tapped hole for user 4-M3×0.5 Depth 6
The weight of the tool attached here should be added to the tip mass.
212
4-φ9
M8 bolt for installation, 4 bolts used
62
53
130
12
183 (Dimensions of base installation part)
117
Maximum 160 during arm rotation
675
±10
Maximum 730
during arm rotation
523
441
User tubing 3
(φ4 blue)
48
User tubing 4
(φ4 white)
256
221
202
167
0
M4 ground terminal
Standard clean room model, dust/drip proof model
Cross section A-A
4-M3×0.5 Depth 5
(There is no phase relationship with the R-axis origin.)
Since this tapped hole is used for the wiring or tubing
clamp, do not apply a large load.
13.4
13.4
View of F
Scale 1:1
User tubing 1 (φ4 black)
User tubing 2 (φ4 red)
If the user tubing is not used,
attach the plug supplied with the robot.
• Suction air joint φ12 (YK500XGLC)
• Since this joint is not used, attach
the plug supplied with the robot to
the joint (YK500XGLP).
Connector for user wiring
(No. 1 to 10 usable. Cable clamp size,
φ13.1 to 15)
If not used, cover the connectors with
the caps supplied with the robot.
93
71
98
58
61
45
32
32
12
0
0
6
22.5
10
26
31
φ70
φ38
0
φ16 h7
- 0.018
Z-axis tip shape
Scale 1:1
User tool
installation range
23510-HM-00

Advertisement

Chapters

Comments to this Manuals

Symbols: 0
Latest comments: